Showing 1–28 of 40 results

IMOD: Improved Modular Stock

SKU: AIB-MSB
$80.95
Designed from lessons taken from the modern battlefield, the IMOD stock provides a highly practical and functional design. In addition,

SASE: SLING MOUNT END PLATE

SKU: VLTSASE-2
$17.96
The SASE sling endplate is an ambidextrous sling plate made to suit the demands of both right and left handed

Vltor 5 Position Receiver Extension

SKU: RPLVLTRRE-1
$48.83
The RE-1 is VLTORs mil-spec carbine receiver extension tube. The RE-1 features five stock positions, each of which has a

Vltor A5 Buffer & Recoil Sys Emod

SKU: RPLVLTAEBK-A5B
$222.68
The VLTOR A5 Stock Combo Kit is not just an EMOD stock with M4 components; it was developed as a

Vltor A5 Receiver Extension Tube

SKU: RPLVLTRE-A5
$51.65
The RE-A5 Receiver Extension is a 7-position receiver extension tube designed to work with the VLTOR A5 buffer system. This

Vltor A5 Spring And Buffer Kit

SKU: RPLVLTSP-A5
$61.98
The SP-A5 Spring and Buffer Kit includes everything youll need to outfit your rifle with VLTORs patented A5 Buffer System

Vltor Ak Ext Mlok Handguard

SKU: RPLVLTCMRD-AKM-E
$237.72
The VLTOR CMRD AK Handguard is the first in many variations that VLTOR has planned for AK handguards. At this

Vltor Ak-47 5 Position Receiver Extn

SKU: RPLVLTRRE-47
$92.99
This adapter and extension combo is a direct replacement for the standard fixed AK-type stock. With this adapter installed, you

Vltor Ar10 Chrgng Hndl Latch

SKU: RPLVLTVCH-LFP
$68.56
The VLTOR Charging Handle is a patented design that redirects the force off of the latchs roll pin and into

Vltor Ar15 Chrgng Hndl Long Latch

SKU: RPLVLTVCH-SF-3
$61.98
The VLTOR Charging Handle is a patented design that redirects the force off of the latchs roll pin and into

Vltor Ar15 Chrgng Hndl Med Ambi Ltch

SKU: RPLVLTVCH-SF-44
$99.58
The VLTOR Charging Handle is a patented design that redirects the force off of the latchs roll pin and into

Vltor Ar15 Chrgng Hndl Med Latch

SKU: RPLVLTVCH-SF-4
$61.98
The VLTOR Charging Handle is a patented design that redirects the force off of the latchs roll pin and into

Vltor Ar15 Chrgng Hndl Shrt Latch

SKU: RPLVLTVCH-SF-5
$65.95
The VLTOR Charging Handle is a patented design that redirects the force off of the latchs roll pin and into

Vltor Carbine Spring And Buffer Kit

SKU: RPLVLTSP-1
$30.97
The Vltor SP-1 Carbine Spring and Buffer Kit is an exceptional choice for replacing existing parts or for a new

Vltor Clamp-on .625 Bore Blk

SKU: RPLVLTGB-CLAMP625BLK
$68.56
Built to the tightest tolerances, the VLTOR low profile, clamp on gas blocks are small enough to fit inside most

Vltor Clamp-on .750 Bore Blk

SKU: RPLVLTGB-CLAMP750BLK
$68.56
Built to the tightest tolerances, the VLTOR low profile, clamp on gas blocks are small enough to fit inside most

Vltor Commercial E-mod Stock Blk

SKU: RPLVLTAEB-CB
$119.30
The VLTOR EMOD provides a variety of enhancements in comparison to other stocks. The increased length is a major benefit

Vltor Commercial Imod Std Tan

SKU: RPLVLTAIB-CST
$89.06
Designed from lessons taken from the modern battlefield, the IMOD stock provides a highly practical and functional design. In addition,

Vltor Fal Casv Long Rail Black

SKU: RPLVLTCASV-FAL
$337.33
The CASV-FAL handguard is designed for the FAL series of rifles. They mount solidly to the standard inch or metric

Vltor Fal Casv Short Rail Black

SKU: RPLVLTCASV-FAS
$310.08
The CASV-FAL handguard is designed for the FAL series of rifles. They mount solidly to the standard inch or metric

Vltor Fn Scar Stock Blk

SKU: RPLVLTVSS-11B
$103.33
This replacement module for the FN SCAR incorporates the same battle-proven enhancements from the VLTOR modstocks. The buttpad has been

Vltor Fn Scar Stock Tan

SKU: RPLVLTVSS-11T
$103.33
This replacement module for the FN SCAR incorporates the same battle-proven enhancements from the VLTOR modstocks. The buttpad has been

Vltor Keymod Pctnny Rail Sctn Blk

SKU: RPLVLTKM-RAIL
$23.45$28.15
KeyMod Aluminum Picatinny Rail Sections… these rail sections allow for installing a Picatinny rail section anywhere you chose! Machined from

Vltor M14 Casv-14 Rail Black

SKU: RPLVLTCASV-14
$337.33
In response to the market demand for an extended and lighter cluster rail, VLTOR released the CASV-14 M14 Rail System.

Vltor Milspec E-mod Stock Blk

SKU: RPLVLTAEB-MB
$119.30
The VLTOR EMOD provides a variety of enhancements in comparison to other stocks. The increased length is a major benefit

Vltor Milspec E-mod Stock Kit Blk

SKU: RPLVLTAEBK-MB
$186.02
The VLTOR EMOD provides a variety of enhancements in comparison to other stocks. The increased length is a major benefit

Vltor Milspec E-mod Stock Tan

SKU: RPLVLTAEB-MT
$119.30
The VLTOR EMOD provides a variety of enhancements in comparison to other stocks. The increased length is a major benefit

Vltor Milspec Imod Clb Ft Blk

SKU: RPLVLTAIB-MCB
$92.99
Designed from lessons taken from the modern battlefield, the IMOD stock provides a highly practical and functional design. In addition,